Electric Detonator Cu
Initiation Systems
Initiation SystemsNİTRONET Product
Electric Detonator Cu
Firedamp-proof electric detonator with copper shell for underground, tunnel and gallery works.
Class
A (sensitive)
Shell
Copper
Wire Length
1.5 m – 3.5 m
Firedamp Protection
Yes
Applications
It is used in all types of underground blasting; in tunnel, gallery and shaft advances, to detonate dynamite or similar cap-sensitive products.
The delay types are used in large-scale blasting to reduce vibration, achieve uniform breakage and proper fragmentation, and increase blasting efficiency. There are 30 ms delay intervals across 16 different numbers.
Safety & Application
Electric detonators must be checked with an ohmmeter before being placed into the primer.
Measures must be taken to prevent static electricity build-up; do not pass near devices carrying electricity or power cables.
In wet environments connections must be insulated; exploders manufactured for this purpose must be used for initiation.
Packaging & Product Dimensions
In cardboard boxes; packs of 50 wrapped in kraft paper inside the box, each pack containing bundles of 25 detonators.
Storage · Transport · Caution
It must be stored in accordance with Regulation No. 87/12028 and transported by ADR-compliant vehicles.
IMDG Code: 1.1 B — UN No: 0030
Initiation Systems
Related Products
Initiation SystemsIn-Hole Nitrotech MS Detonator
In-hole non-electric detonator with customer-specific delay intervals for open pit blasting.
View
Initiation SystemsSurface Connector Nitrotech SD Detonator
Flexible surface connector detonator that adds surface delay to in-hole non-electric detonators.
View
Initiation SystemsNitrotech Non-Stop (Non-Electric Detonator)
MS+SD — in-hole non-electric detonator initiation system with surface delay.
View